Having trouble with my haunted E again. The rebuilt, maybe 400 miles tops use starter I installed last fall after the previous one chewed up the teeth, has just died. The plunger activates when turning the key to start, dims the lights, so there is a big current draw, but does not engage the starter, so that points to the starter solenoid. After several tries installing the mechanic got it to work last year without "growling" to much and has worked ok, but it appears to be under more stress than my F, which is pretty much identical, except it has a 440 in it. I have repaired the motor I took out last year ( was on the car for 15 yrs before rebuilding it) , but I don't want to install it if it is not 100% correct. Could someone cross check the stamping on this starter for me? The stamping is 1834 211 99214 Keep in mind this car has been in Canada all it's life as far as I know & perhaps part #'s are not the same. Thanks for any help. Lindsey Fuller 300 E,F [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/