The difference is .09! Could that be the ware being used for 54+- years or so long? What does the Chrysler service manual indicate it should be? ----- Original Message ----- From: "Larry Jabin" <larry@xxxxxxxxxx> To: Chrysler300@xxxxxxxxxxxxxxx Sent: Sunday, September 16, 2012 7:18:14 AM Subject: [Chrysler300] 1958 Chrysler 300D Upper Control Arm Bushings????????????? I cannot seem to find the correct size Upper control arm bushings anywhere The OD of the bushings I removed are 1.030 All the parts suppliers ( Napa, ESPO) show a bushing that has OD of .94 when the look it up for a 1958 Chrysler 300 or NYR Has anybody had the same issue & if so where you able to find the correct size bushings? Thanks Larry Jabin P.W. Bellingall, Inc. 500 Sansome Street Suite 501 San Francisco CA 94111 Tel: 415-781-8640 Fax: 415-781-0155 Larry@xxxxxxxxxx <mailto: Larry@xxxxxxxxxx > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/