Re: [Chrysler300] Electric Fuel Pump

[Mark Lindahl <mplindahl@xxxxxxxxxxxxx>]

Hi Anthony,
 
It is a new 413 rebuild, but I had the same problems with the old 383 and I am sure many of the old Chryslers had this same issue.  Are new rebuilds supposed to run hot?
 
1)  After returning home from a ride with a hot engine, the next day there is no fuel in the bowls.  Many cranks are needed to get fuel to the carb.  I am a bit worried about the starter and surrounding cables.
 
2)  After a hot ride and then the 300 sits for 30 min, there is a small amount of flooding.
This is easier to handle.  Just hold the throttle wide open and it starts fairly quick.  I will say that there seems to be a lack of fuel in the bowls under this condition and the engine seems starved for fuel for about 20 seconds until it can catch up.
 
Therefore, the electric fuel pump would be needed for item 1 above.
Thanks for all the input.
 
Mark

--- On Sat, 6/30/12, Anthony Rinaldi <awrdoc@xxxxxxxxx> wrote:


From: Anthony Rinaldi <awrdoc@xxxxxxxxx>
Subject: Re: [Chrysler300] Electric Fuel Pump
To: "Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>
Date: Saturday, June 30, 2012, 7:00 PM







Hi Mark,

Do you have a problem starting the engine when it sits for a long period?

Do you have any symptoms of vapor lock? Starves for gas when it is hot outside. 

If you answer those 2 questions, I will render an opinion. 

Tony







From: Mark Lindahl <mplindahl@xxxxxxxxxxxxx>; 
To: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx>; 
Subject: [Chrysler300] Electric Fuel Pump 
Sent: Sat, Jun 30, 2012 10:52:59 PM 





  



Hi All,
 
I know there are several electric fuel pumps available, but I saw this one available at Auto Zone. This would be for a '63 Chysler 300 Conv. with single 4 bbl. 413
If you have other suggestions, let me know.  Let me know your comments.
 
There have been many comments about using the electric fuel pump to 'fill the bowls', but I would like to hear again the pros and cons of running the fuel through the engine mounted pump.
 
Regards,
Mark Lindahl
 
Airtex Products/10 to 14 PSI 20 to 25 GPH electric fuel pump   $59.99
Part Number: E8887 

12 V
10-14 PSI
35 GPH
5/16 Hose

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/