Re: [Chrysler300] J / ram K owners...............
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] J / ram K owners...............



Have you tried compressable metal gaskets?  I've heard that they're available for Chevy motors, so maybe Mopars can have them, too!  I'll try to find out if they do exist.  I hope I can change them without removing the intakes.

George Clineman



-----Original Message-----
From: pffkllc <pffkllc@xxxxxxx>
To: robert554 <robert554@xxxxxxxxxxxxxx>; Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx>; News4ge <News4ge@xxxxxxx>
Sent: Wed, Feb 29, 2012 7:10 am
Subject: Re: [Chrysler300] J / ram K owners...............


Can we assume that there has been no warping of the block?  Not much sense in milling the manifolds if the surfaces to which they are to mate are not true as well.  I have a similar problem with my G and while I certainly don't have headers on it, I keep blowing manifold gaskets one after the other.  Maybe I should consider having them milled to see what the result might be.
 
Pete Fitch

In a message dated 2/28/2012 9:48:35 P.M. Eastern Standard Time, robert554@xxxxxxxxxxxxxx writes:
 

the manifolds need to come off and taken to a machine shop and milled flat . both surfaces against the head and the head pipe . then NO gaskets . just a little hi temp silicon gaskets maker. i am sure the two middle ports are warped, most of them are ..bob hayen 
----- Original Message ----- 
From: News4ge@xxxxxxx 
To: Chrysler300@xxxxxxxxxxxxxxx 
Sent: Tuesday, February 28, 2012 6:12 PM
Subject: [Chrysler300] J / ram K owners...............

Hi,

I remember some discussion about excessive heat coming out of the exhaust ports and blowing header gaskets. Has this happened to you? Have you found a relatively easy way to fix it? I REALLY don't want to remove the intakes again. Is it possible to unfasten all the nuts and bolts and have enough wiggle room to slip on a new gasket, or even to use a sealer or liquid gasket? Is the temp. coming out of an exhaust port too much for a sealer? Didn't someone say that some of these cars didn't even get header gaskets from the factory?

I hope someone can help answer this. The noise and fumes are getting tiresome!

Thanks,

George Clineman

[Non-text portions of this message have been removed]

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4840 - Release Date: 02/28/12

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.