Re: [Chrysler300] J / ram K owners...............
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] J / ram K owners...............



the manifolds need to come off and taken to a machine shop  and milled flat . both surfaces  against the head and the head pipe .  then NO  gaskets . just a little hi temp silicon gaskets maker.   i am sure the two middle ports are warped,  most of them are ..bob hayen  
  ----- Original Message ----- 
  From: News4ge@xxxxxxx 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Tuesday, February 28, 2012 6:12 PM
  Subject: [Chrysler300] J / ram K owners...............


    

  Hi,

  I remember some discussion about excessive heat coming out of the exhaust ports and blowing header gaskets. Has this happened to you? Have you found a relatively easy way to fix it? I REALLY don't want to remove the intakes again. Is it possible to unfasten all the nuts and bolts and have enough wiggle room to slip on a new gasket, or even to use a sealer or liquid gasket? Is the temp. coming out of an exhaust port too much for a sealer? Didn't someone say that some of these cars didn't even get header gaskets from the factory?

  I hope someone can help answer this. The noise and fumes are getting tiresome!

  Thanks,

  George Clineman

  [Non-text portions of this message have been removed]



  
  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2012.0.1913 / Virus Database: 2114/4840 - Release Date: 02/28/12


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.