> 1) Water soluble degreaser works well with warm water and Scotch Brite pad > to remove the gray goo from plastic lenses. If I remember correctly, I was able to clean off the gray goo merely by using dish soap and warm water, along with a soft sponge. Scotch Brite may be overkill and will leave scratches. Take your time on this. Ron ----- Original Message ----- From: "Gary Nelson" <gnelson@xxxxxxxxxxxx> To: "Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>; "'Narve Nordanger'" <narve.n@xxxxxxx>; <Chrysler300@xxxxxxxxxxxxxxx> Sent: Sunday, February 26, 2012 2:20 PM Subject: RE: [Chrysler300] Replacement for instrument glass glue 55-59 >I use the 1/16" o-ring for my gage faces. Henry may have got it from me, >the > other Gary. I remember sending some to club member long ago. It is > available > in random lengths from industrial suppliers as Henry says. > It only needs to be Buna N material, not high temp silicon. You can make > an > o-ring to size and glue with instant adhesive. It sits on top of the > grove, > don't push it in. > > TIP: > 1) Water soluble degreaser works well with warm water and Scotch Brite pad > to remove the gray goo from plastic lenses. > 2) Use dish soap and water to sand out scratches prior to buffing. > 3) Use a sanding rubber pad to avoid finger marks when sanding. > > Thank you, > Gary, the parts doc > Escondido, CA 92026 USA > Land Of The Avocado > Mail: garythepartsdoc@xxxxxxxxxxxx > 760 751-1958 > > ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/