sounds like you have either the wrong d/shaft or the wrong diff or yoke. This don't make sense, something is really haywire here. Did you loose the caps off one end?? What's in it now for a U-joint?? Original part # is 1752-624 which is NAPA #315 and Spicer #5-1306X Dave Schwandt ---- Ronald Kurtz <mark6268@xxxxxxxxxxxxx> wrote: > Hello, Everyone: > > I need to replace the rear unversal joint on my '64, but noticed the space for > the joint on the differential yoke is greater than what's required on the end of > the dive shaft. Stars with equal distance between the center and the end of the > four arms are too short to be properly placed in the yoke. > > Any suggestions or recommendations? Is there a specific part number for which I > should be looking? Thanks in advance for any/all responses. > > Best, > Ron Kurtz > E #292 > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or > go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button > > For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links > > > ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/