Fuel distribution changes with one carburetor blocked! YES!! Four Cylinders shut down---NO! There is no barrier in the manifold to prevent either carburetor from feeding the other 4 cylinders, but you certainly might notice some loss of smoothness. Of course, a real 300 engine isn't very smooth at idle anyway. ---------------mg ---------------------- Original Message ---------- From: "Warren Anderson" <wranderson@xxxxxxxxxxxxx> To: <Chrysler300@xxxxxxxxxxxxxxx>, "Ron Waters" <ronbo97@xxxxxxxxxxx> Subject: Re: [Chrysler300] 300C Dual Quads Date: Fri, 12 Aug 2011 11:13:48 -0700 Ron, For your future knowledge storage, watch the manifolding configuration with multiple carburetor engines. For instance, a C300, factory manifold, with the dual chokes; each carburetor feeds 4 cylinders. Lose one carburetor for any reason and half the engine (every other cylinder in the firing order) will shut down. Warren Anderson Sedona,AZ In the interest of problem solving, is it possible to run a dual quad car exclusively on the rear carb, and effectively 'shutting off' the front carb ? If so, how would you go about that ? I'm assuming that the rear carb is the one with the choke, BTW. Note: This is not related to an actual problem. I just need this info so I can store it away for future use. Ron [Non-text portions of this message have been removed] ____________________________________________________________ Penny Stock Jumping 3000% Sign up to the #1 voted penny stock newsletter for free today! http://thirdpartyoffers.juno.com/TGL3131/4e458734c9224638807st01duc [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/