Re: [Chrysler300] G vibration/grinding noise in rear

[moparpjf@xxxxxxx]

If you have an F or a G and you got your exhaust from Eileen  Brass, you 
probably know that one of your  header pipes comes very  close to the torsion 
bar on the passenger side.  Over time, that pipe will  move over and begin 
to rub on the torsion bar, and it requires an adjustment  from time to time.
 
Pete Fitch
 
 
In a message dated 10/26/2010 4:42:22 P.M. Eastern Daylight Time,  
hurst300@xxxxxxxxxx writes:

I  agree!
Jack it up, use a piece of wood, like a 1X4 against the pipe and a  pry-bar 
against the frame 
You should be able to put enough "Push" on it to  move it 1/2 inch farther 
away from the frame.
Do this as close to the  problem area as possible and work your way closer 
to the actual spot it's  hitting.
Tweaked many, Ray



On Oct 26, 2010, at 2:52 PM, Ryan  Hill wrote:


Sounds like alot of time to tweak some pipes for  clearance...... Most 
shops can custom fabricate a complete system, install it,  and tweak it to clear 
everything in about 3 hours. Just  sayin'.....

Ryan Hill  






------------------------------------

To  send a message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send  an email to bob@xxxxxxxxxxxxx or
go to  http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave  Group" button

For list server instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups  Links






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/