Re: [Chrysler300] Overheating Issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Overheating Issues



No real difference in cooling capacity results from slowing or speeding the flow rate through the cooling system.  A possible benefit of speeding it in a high performance situation is that there could be a reduced likelihood of having a hot spot in the engine, ie, there could be a little more even heat distribution throughout the engine with a resulting reduction in parts distortions.
Old wives tales are very persisten.
-----------------------mg

---------- Original Message ----------
From: Bill Huff <czbill@xxxxxxxxxx>
To: 2HsandaHeritage@xxxxxxxxxxx,charlies@xxxxxxxxxxxx
Cc: chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Overheating Issues
Date: Fri, 04 Jun 2010 16:26:03 -0400

  
This brings up an old caution, or else it's an 
old wive's tale. "Don't remove the thermostat, 
the coolant will pass through the radiator too 
fast to cool", says the old saw. Seems to me to be contra logical.

I have run MANY cars without a thermostat and 
never found it made the car overheat. I stopped 
doing it when I pulled an engine and it was so 
sludged up the oil pan was a solid of grease with 
a tunnel for the crankshaft. I run thermostats 
to make sure the engine gets up to temp on short 
runs to burn off moisture and other 
contaminants. I can't see the reason for a 
larger opening thermostat unless the size of the 
engine (stroker) is greatly enlarged.

Any thermodynamicists out there care to attack this problem?

Bill Huff

At 6/4/201010:49 AM, 2HsandaHeritage@xxxxxxxxxxx wrote:
>
>
>
>
>Charlie,
>
>I forgot to tell you of one other thing that I did.
>
>Chrysler performance has (or had) thermostats with larger openings.
>
>I have one in the "problem" car, but can't say if it helped or not.
>
>Doug
>
>----- Original Message -----
>From: <mailto:charlies%40xplornet.com>charlies@xxxxxxxxxxxx
>To: <mailto:chrysler300%40yahoogroups.com>chrysler300@xxxxxxxxxxxxxxx
>Sent: Thursday, June 3, 2010 6:57:47 AM GMT -08:00 US/Canada Pacific
>Subject: [Chrysler300] Overheating Issues
>
>Â
>
>Hi All,
>Since we all drive the same type of "large 
>autos", perhaps this group could come up with a 
>few answers / suggestions to my problem. Seems 
>that when I'm in heavy traffic with my 62 dual 
>quad sport, the temp guage wants to live at the 
>wrong side of the guage (hot). Then the car 
>wants to bog and stall. At highway speeds she drives and cools much better.
>The radiadtor shop confirms that the rad is the 
>original one that was shipped with the car - 
>although only 29k on the drive train, they seem 
>to think that the core would be pluged up. I did 
>a cooling system flush with vinegar and water 
>and that helped somewhat but not enough. The rad 
>shop wants to re-core the rad with a 3 core low 
>flow core. Does anyone have thoughts on low flow 
>cores. The rad shop says this type of core is 
>more efficient than the old tech OEM core. The 
>clutch fan is good, the 160 degree thermostat is 
>new, the hoses are all good and I'm pretty sure 
>the head gasgets are good. Also would any of the 
>following items have an effect on engine 
>temperature under NORMAL driving conditions - 
>carb jetting, spark plug heat range, distributor 
>timing. Also would an aux trans cooler help this 
>situation. I suspect the rad is the major issue 
>here, but I'd like to cover all bases if I can.
>Thanks, Charlie in Ottawa (62 Sport).
>
>[Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]



____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3131/4c0971d1abd5825490fst03duc

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.