Re: [Chrysler300] Re:300L washer pump

[Ray Jones <hurst300@xxxxxxxxxx>]

Try finding a brass tube small enough to go into the teat. Then slide the old end over it. A splice sorta.
Maybe a piece of an old ball point ink tube.
Ray



On Apr 15, 2010, at 7:12 AM, JJ wrote:

Hi Harold,
My washer pump in my L works ok but the teat that the tube pushes onto has snapped off. so i too would be happy to find a repro replacement if there out there. I could glue a new teat/piece of tubing on it, but the plastic is very powdery and old which could make gluing difficult ?
cheers
Jeff

[Non-text portions of this message have been removed]

__._

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/