I think Gary Goers and perhaps Jeff Carter as well are doing the 60-64 sill plates, although I don't know whether they are available yet. Pete Fitch In a message dated 11/3/2009 11:05:15 A.M. Eastern Standard Time, finsruskw@xxxxxxxxxxxxxxx writes: Why can't the club look into getting these repro'ed?? Good grief, they fit everything up through '64. Dave Schwandt ----- Original Message ----- From: "George McKovich" <george@xxxxxxxxxxxx> To: "Tom Cox" <tdcox@xxxxxxxxxxxxx> Cc: "rob kern" <robkern@xxxxxxxxxxxxx>; <chrysler300@xxxxxxxxxxxxxxx>; <JettLarry@xxxxxxx> Sent: Tuesday, November 03, 2009 9:03 AM Subject: Re: [Chrysler300] Sihilling Plating > Tom > I sent my anodizing to Marco at Anobrite, which is now King of Trim > after poor results from Sihilling..... The result was just about as > bad. I am now puzzled as to who to use now. My previous experience > with Anobrite wa superb. I will say this... Neither of the companies > are doing their own work any longer and who knows who they are sending > it out to.... My guess is it is going to Mexico! > > That's my take on it at thus time and I am so discouraged that I am > consider not going any more cars. > > George > > > Sent from my iPhone > > On Nov 3, 2009, at 7:53 AM, "Tom Cox" <tdcox@xxxxxxxxxxxxx> wrote: > >> I am sending this to Rob and the rest of the 300 list server regarding >> Sihilling Plating and my experience. I know Rob has had excellent >> results >> with Sihilling and I believe others have, as well. George McKovitch >> had a >> problem that he reported and I have had a problem, too. Just the >> facts, >> though. >> >> I sent Sihilling pieces from the console and sill plates for my F >> restoration. The console pieces were returned just as expected with >> a nice >> anodized finish and the sill plates came back in a very bright, >> polished >> finish. I am certain I clearly stated that the sill plates and console >> pieces were to be anodized. The big problem is that I received sill >> plates >> from a 57 or 58 300. >> >> I have spoken with Charles' son and his wife. His wife told me that >> she >> takes a picture of each order after it is stripped and she sent me a >> picture >> of my order with the 57/58 sill plates, so they are convinced that >> this is >> what I sent them. Problem is, I have never had a 57 or 58 300 >> restoration >> and have never had 57/58 sill plates. I don't know where my 60 sill >> plates >> have gotten to, but I am certain I sent Sihilling the correct 60 sill >> plates. Specifically, I had two sets of 60 sill plates and I sent >> the best >> pair to Sihilling and now they are gone. >> >> I have asked both Charles' son and wife to have Charles call me but >> to no >> avail. I have not spoken to him. I asked Mrs. Sihilling if they would >> anodize my other set of sill plates since my original set is lost >> and I have >> not heard back from her or Charles. >> >> I know that manufacturing processes can have mistakes and all I >> expected was >> a call to express regret and an offer to try to resolve the problem. >> I got >> neither. I am done with Sihilling and I hope that anyone else that >> uses them >> takes a picture of what they are sending and is clear as to what is >> to be >> done to their order. I am sending my second pair of sill plates to >> Ano-Brite >> in CA at Jeff Carter's suggestion. If they don't turn out too great, >> I am >> going to buy a set from Jeff Carter and try again. >> >> Thanks to all that tried to help. >> >> Tom Cox >> >> [Non-text portions of this message have been removed] >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups > Links > > > > ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/