[Chrysler300] 300F Dash Panel Lights

[pennsy300@xxxxxxx]

I'm having problems with the instrument lights on my  300F.   For 
background, I have recently replaced the high voltage  transformer, and the problem 
is with all the lights (including the 12 volt  pushbutton lights).   The 
light switch sounds like something is  scraping inside when I twist it to 
increase or decrease the intensity, and only  with a lot of twisting will the dash 
lights come on.  I can get full  brightness, but only after nearly five 
minutes of twisting the knob back and  forth.  Normally, when I turn on the 
lights, no dash lighting  appears.  Has anyone else had this problem, and does 
anyone know of perhaps  a spray that might clean up the switch contacts 
inside the switch?    Terry McTaggart


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/