Hello over there? In Sweden long time ago before the Internet and the sea of parts we have now, we had to go another way with this special part when it gave up. We put some extra washers on the bolts BETWEEN the trunnion and the handbrake drum just to move the workingarea for the joint? That worked for many beers and miles? Today it may be a ?takemehomemagictrick? but it worked in the old days? Best regards? Johan 300-G Conv. Batmanblack? -----Ursprungligt meddelande----- Från: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] För Andy Mikonis Skickat: den 18 augusti 2009 18:09 Till: chrysler300@xxxxxxxxxxxxxxx Ämne: [Chrysler300] Need ball and trunion housing Hey gang, The driveshaft shop tells me the housing on my ball and trunion is no good, and they can't find anything for it. Just got off the phone with Bernbaum's, he doesn't have them. Anybody have any leads? Have to get the G back together so I can bring it to... where was that again?! Andy Mikonis 300G jacked up in the garage in Chicago [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/