[Chrysler300] carb rebuilds

[Jim McGowan <quadshop@xxxxxxxx>]

I have done several carbs for club members and have had no problems with 
any of them. I flow bench test ALL of the units to make sure that 
everything works correctly,ie:float,needle& seat, and correct fuel flow.
 Yes the throttle shaft hole can be bushed and remove the vacuum leak.
 Jim McGowan
 The Quad Shop, LLC
As advetised in the club newsletter


____________________________________________________________
Find success and happiness with drug and alcohol rehabilitation. Click now.
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTJWRWFH28A8QpGMyDBUHYIiTgWAPehNKpwVdrBDv23e8SA5Qk2Adq/


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/