[Chrysler300] re identifiy radiators and fuel tank
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] re identifiy radiators and fuel tank



    While cleaning up today, I came across two old Mopar radiators with following part #'s:
2445642 and  2524986. Could someone please identify those two rads.

    I also found a very nice gas tank which I think is Mopar but don't know where to find factory number on it ( I couldn't find any numbers stamped anywheres) except that it is marked with felt pen as follows:  A4-E162-3M. It is approximately 3 ft wide, 26 inches deep and 6 inches high. The inlet comes off the drivers side ( I think)  about 9 inches from the rear and about 17 inches from the front part of the tank. The inlet has about a 2 1/2 inches opening.
     Any help would be greatly appreciated.   Thanks from Fern



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.