I am trying to rebuild my power seat "slave" gearboxes. The diecast mounts were broken out on the originals and the replacement ones I got had started to bend and crack. The housing is obviously a weak design for the high forces involved and I suspect all used ones are broken or on their way out. I think I have figured out a possible way of reinforcing the gearbox with some extra bolts tapped into the frame underneath. However, before I launch into that, I thought I'd ask if anyone knew a source for good gearboxes or had developed a fix that held the gearboxes better. Also, if anyone has a good set of plastic? covers that go around the sides of the seat cushion, let me know. (Gary Goers doesn't have them) I have the 58? chrome ones if all else fails. Thanks Henry Schleimer Brisbane Australia [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/