Re: [Chrysler300] 1962 Parking Brake Switch Plug

["Jim Maiani" <jmaiani@xxxxxxxxxxx>]

Sorry Matt...I can't answer your question, but I have a question on what you just did.  My 62 brake light is also out.  Was it a major deal to get to that bulb?  Does the pod need to come out?

thanks and sorry again....

Jim Maiani
Houghton lake
62 H



From: Matt Allyn 
Sent: Tuesday, December 02, 2008 10:57 AM
To: Chrysler300@xxxxxxxxxxxxxxx 
Subject: [Chrysler300] 1962 Parking Brake Switch Plug


My parking brake light stopped working on our 1962 300, so naturally I replaced the bulb....which didn't solve it!  I then looked at the switch and noticed the 46 year old wire had left it's housing.  I have pulled off the small "bullet" looking connector.

Anyone know if these connectors are still available?  If not I will need to un-crimp the current bit of wire still inside the connector and crip a new stripped wire into it.
 
Matt Allyn

[Non-text portions of this message have been removed]



 

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/