Fw: Re: [Chrysler300] stainless trim repair

[Marshall Larson <yelof@xxxxxxxx>]

Straightening and repair of any metal can be done with less stretching if
the piece being worked is placed on a tightly filled bag of sand.  The
sand will provide ample support but will allow the metal to move with out
stretching.  Pieces of very hard wood such as oak can be sanded to the
approximate profile desired and used as a punch.  Much care must still be
used.
 
Minnesota Marshall

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/