- Remove the lower steering column jacket / the steel painted piece with 5 or 6 sheet metal screws - The indicator switch is held onto the (drivers side) of the steering column by 1 sheet metal screw. Remove that screw. - The switch will drop down / unplug the wires - You will most likely see that the black plastic finger of the switch is broken off / Send it to Jeff Carter at JC Auto for repair. Matt Allyn ----- Original Message ---- From: Lindsey Fuller <yesdnil@xxxxxxx> To: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>; wally breer <wbreer@xxxxxxx> Sent: Tuesday, June 24, 2008 8:34:17 PM Subject: [Chrysler300] F,G,H? turn signals again It appears my problem is in the switch mechanism. Anyone removed one of these before? How do you get at it? It appears from the exploded diagram in the car parts catalogue I have that it might be attached to the shift housing. Very difficult to see up there or from the face of the dash with the chrome shift button housing removed. Once removed, is it serviceable? Any help greatly appreciated. Lindsey in sunny Winnipeg with a sore back already. [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/