Re: [Chrysler300] moulding

[moparpjf@xxxxxxx]

In a message dated 3/8/2008 5:47:52 PM Eastern Standard Time, 
robkern@xxxxxxxxxxxxx writes:

I don't have the stainless moulding but I have to comment on the event that 
led up to your needing one.  This harks back to a discussion a few months ago 
regarding Cs with the windshield upper stainless moulding in the corners being 
reinforced with stainless screws.  

Not only C's - On the way to the Coldwater meet, the stainless molding on the 
top of the windshield on my K left me somewhere on the Ohio Turnpike.  The 
entire piece simply flew off the car at maybe 85 mph.  After losing two of them, 
I learned that a piece of double sided tape under the stainless will prevent 
that loss.
 
Pete Fitch.



**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/