Re: [Chrysler300] moulding

["rob kern" <robkern@xxxxxxxxxxxxx>]

Loren,
    I don't have the stainless moulding but I have to comment on the event that led up to your needing one.  This harks back to a discussion a few months ago regarding Cs with the windshield upper stainless moulding in the corners being reinforced with stainless screws.  Apparently it was a dealer modification recommended by Chrysler to prevent such an occurence at highway speeds.  Story goes that during speed trials at Daytona, it was a requirement that the whole vehicle cross the finish line, meaning it couldn't have trim pieces,etc. flying off or the vehicle would be disqualified. What you experienced is what prompted some vehicles having been taken back for the screw reinforcement fix versus others that weren't per owner/dealer inattention/ignorance. Try contacting club member George McKovich at 208-308-2681.  He may be able to help you.  300'ly, ROB KERN
  ----- Original Message ----- 
  From: Loren Morgan 
  To: chrysler300@xxxxxxxxxxxxxxx 
  Sent: Saturday, March 08, 2008 8:57 AM
  Subject: [Chrysler300] moulding


  hi out there 300 people
  i asked if anyone had this awhile ago with no response,thought i'd give it another shot.
  i have a "C " convert and the stainless moulding that goes across the header bar on the outside about 3" wide & in 3 pieces 1 long 2 short about 3'x7".
  i need the short one on the passenger side (blew off while flying down the road)
  anybody have one?
  loren
  lorenmorgan@xxxxxxxxx

  ---------------------------------
  Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/