I think that as long as there is someone (JC Auto) making these things, the club should focus efforts elsewhere. There are so many items that are not available for these cars, I think it would be best to focus on the things that are not available, even if the price might be better from the club. Jeff has done a good job of servicing members of the club. Wes hould appreciate what he has done. Best regards, Richard Osborne >>> "Bob Merritt" <bob@xxxxxxxxxxxxx> 11/28/07 1:15 pm >>> I have been asked to forward the following message: +++++++++++++++ The Restoration Committee is considering reproducing the manifold "block- off" plates for the '60, '61, '63 and '64 ram cars. Initial cost projected for sale would be about $75.00 per pair plus postage. We would like to get a response from the members to see if these would be an item they need. The Restoration Committee +++++++++++++++ You can forward replies to me and I will aggregate, accumulate, spindle fold and mutilate. I am especially good at folding. Rrr To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/