having just done all the required adjustmenst on the trans linkage on my 300F I dont recall anu "bushings". Most of the connections are sliding links for optimum adjustment. The pivot shaft on the firewall may have bushings but I dont recall seeing any. There are brass bushings in the manifolds for the bell crank. Could these be the ones referred to? Paul Martin --- Kenny Cassady <kennycassady@xxxxxxxxxxxxx> wrote: > Hello all in 300 Land, > > Hoping you can help with this one. I'm told by my > transmission shop (thank > you Larry) that I need to replace the bushings in > the transmission linkage > on my 300G, the linkage between the carbs and the > trans that is (I'm having > a problem picturing this, and don't have my shop > manual handy). They have > adjusted the linkage as far as possible, and have > the trans performing as > normal as possible. But to "get it right" we have > to replace the bushings. > > Can anyone help identify these bushings (part #, how > many, etc.) and perhaps > suggest some sources of availability? > > Many thanks, > > Kenny Cassady > 300G hardtop > Oakland, CA > > Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/