[Chrysler300] Speed Control Brake Switch - 1962 300

[Kenneth Wilson <jblken@xxxxxxxxxxx>]

Hi all;  I just installed the auto pilot wire harness in my 62 and think 
I need a different type brake lite switch or some form of brake operated 
switch to connect to the speed control's, under dash harness, connector 
with lite blue and red wire.  I'm using the shop manual wiring schematic 
for the Imperial as the chrysler schematic is not showing the auto 
pilot  wiring.  A check of the parts manual shows only one brake lite 
switch application?  I guessing the auto pilot brake lit switch should 
have 2 separt contacts instead of the usual one contact

Can someone help me with a description (or picture) of what type  of 
brake switch is used for cars with speed control control and where 
mounted under the dash (if a separated switch ?)

Regards  ken Wilson
62H


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/