RE: [Chrysler300] Aluminum keys equals faster 300s?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Aluminum keys equals faster 300s?



Somebody has/had to ask, so it may as well be me.

Question: if aluminum keys made 300s/Mopars faster as a US Member just 
proposed, what happens when they are later fitted with (heavier than 
original (Nylon) steel belted tires  !!??  Are we now faster or slower ?!!

Just kidding of course, (unless one deducts the steel that has since rusted 
away in our now nearly/mainly 50 year old 300s - 'lost rusted steel' equals 
car now weighs less - in which case we obviously are back to our original 
'faster'  !!!? )

Christopher in Australia


>From: "Rich Barber" <c300@xxxxxxx>
>To: "'Chrysler 300 Broadcast'" <Chrysler300@xxxxxxxxxxxxxxx>
>Subject: [Chrysler300] Aluminum keys-update
>Date: Mon, 3 Sep 2007 20:49:23 -0700
>
>We are at '49-'63 Chrysler products having aluminum keys from the factory.
>Any information on pre-'49 and/or post '64's?  Any judging pluses or 
>minuses
>for Al keys?
>
>I liked the part about the lighter keys helping performance.  Maybe the
>dissimilar metal electrochemical reaction produces that added kick?  I have
>both the nickel-plated brass and aluminum keys with the DCPD emblems for my
>1955 and every detail of their design is identical.  The grooves are the
>same for both keys, but the octagon-head key for the ignition switch and
>doors is cut different from the rounded-square head key that fits the trunk
>& glove compartment.  The IBM card build sheet contains key numbers for the
>"IGN KEY NO.", "R. DECK KEY NO." and "GL. BOX KEY NO.".  The rear deck and
>glove box key number is the same, but there is an indication they could be
>different.
>
>Thanks to all that responded for the very prompt and mostly consistent
>response.
>
>C-300'ly
>Rich Barber
>Brentwood, CA
>1955 Chrysler C-300
>
>More:
>
>I have original aluminum keys in my 49, 50 and 55 Chryslers.  Not sure if
>they started in 46-8 or not but were what was done by 49 for sure.  My 48
>Desoto has brass keys but they were replaced ones I'm sure.
>
>My 64's don't appear to have been aluminum since they went to the pentstar
>then and were a different looking key by then.  Got to admit I had expected
>the 63's to be brass also.
>
>Both oem keys for my 52 Plymouth Suburban have the dcpc emblem embossed on
>their aluminessness.
>
>I just checked and my 1961 Newport came with aluminum keys... I bought it
>from the original owners a couple of years ago...this is just another 
>reason
>that the Chryslers were so darned fast...........lightweight keys....if 
>your
>present keys for your 57 C are non-aluminum my C is gonna be faster that's
>for sure.......
>
>Hi 300 Fans,  All of my four 56 Chryslers and a 55 NYer I drove in
>highschool (now sadly gone) had/have aluminum keys as originals.  I 
>remember
>clearly my Dad commenting on the set he got the day he took delivery of his
>Windsor about how light weight they felt in his hand and wondering if they
>bent easily.  Those keys are the ones I use today when I drive that car.
>
>The only set of keys I have for my 57 C #2550 are both aluminum......If 
>John
>Chesnutt is reading the listserver today he might shed some light as he
>bought his 57C back when it was new....
>
>Looks loike an original to me also. All then 50's MoPars I have owned had
>these as well as my F and a G we used to own. Now the real question, Why
>would it cost almost $4 to ship a KEY?????
>
>My 62H has aluminum keys.
>
>Canadian Chrysler products came with Al-You-Minium keys.  And the keys 
>might
>have been transformed to that elemental isotope when they were exported 
>down
>under??
>
>-----Original Message-----
>From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
>Behalf Of Rich Barber
>Sent: Monday, September 03, 2007 9:36 AM
>To: 'Chrysler 300 Broadcast'
>Subject: [Chrysler300] Aluminum keys
>
>Recap on keys:
>
>'57-'63:  Chryslers and some other Chrysler products probably came with
>aluminum keys.  Any other information on '55-'56, '64-'65 and Hurst 300's
>would be appreciated.
>
>Apparently, aluminum blanks are now as scarce as hens' teeth.
>
>Dealer's replacement key blanks appeared to be the attractive nickel-plated
>brass keys.  I suspect the grinding wheels used to "cut" keys might have
>loaded up on aluminum.  The brass keys seemed to wear better and were maybe
>stronger.  I recall seeing a lot of well-worn aluminum keys on old MoPars,
>but brass keys could get pretty well worn, also.
>
>Thanks to past and future respondents on this key question.
>
>C-300'ly,
>Rich Barber
>Brentwood, CA
>1955 Chrysler C-300 (with a set of Al keys)
>
>there is an aluminum keyblank on 3-bay for the 57-60 chryslers a dead 
>ringer
>(BUT NEW) for the key I have for my white 300 So it sure looks like the 
>real
>deal here  item # 170144669106
>
>http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&item=1701
>44669106
>
>Can anyone confirm which years Chryslers came with aluminum keys from the
>factory?  I'm pretty sure my '50 and '51 had aluminum keys and maybe
>Grandpa's '55 DeSoto, also.  I don't think my '63 had aluminum keys.
>
>One of my 300Cs (April 1957) has aluminum keys - one is red, but don't
>remember what lock this fits.  Also I do not know if original keys or not.
>Amongst keys that came with Supercharged 300C (late Dec 56), are also a set
>of aluminum keys. They possibly could be original, because they were with a
>fair few 1956-58 original letters and receipts that came with car also, so
>keys could also date back to then?
>
>I got my '61G from the original owner and I got aluminum keys with it. I
>can't say for sure they are the original keys.
>
>my '63 had aluminum keys
>Mine did, I still have the car and the keys
>
>I am pretty sure my '61G does not but my '58 Desoto did (I still have a
>set).  My '58 Dodge Super D does.  Hope that helps.
>
>

_________________________________________________________________
Advertisement: Make shopping exciting. Join eBay for free @ www.eBay.com.au 
http://direct.ninemsn.com.au/adclick/CID=02fda8540000000000000000



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.