[Chrysler300] 300 PW wiring Help

[Kenneth Wilson <jblken@xxxxxxxxxxx>]

Anyone can direct me to, or have, a PW wiring diagram for the 300H 
(assume F & G same).   My shop manual only shows the wiring for the non 
letter cars (with 4  switches -not the 3 in center console).   I also 
find that the H power window wire harness,  I have , has about  5 wires 
input instead of the normal 2 (that of my sport 300 PW wire harness), 
also none of the 5+ wires  reach the circuit breaker block located under 
the left corner of dash (high above the kick panel) End is  about 8-10" 
short of reaching the circuit block (if that is where the 5 wires 
connect - also wonder why so many power  wires?).    Was there suppose 
to be a lower terminal block, behind the kick panel, for this harness 
end?  The car has been apart for 20+ years and I'm trying to get it back 
together. 

Any help is appreciated - even a picture of the harness input end.

Ken Wilson
300H


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/