[Chrysler300] Question re: Pertronix

[Kenny Cassady <kennycassady@xxxxxxxxxxxxx>]

Hey gang.  Quick question... can anybody tell me if the wire from a
Pertronix electronic ignition (on a 300G) should attach to the ballast
resistor on the 6v or 12v end of the resistor?  What kind of difference
might one notice if it were attached to the wrong end of the resistor?

Thanks much!

Kenny Cassady
Oakland, CA
300G



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/