Re: [Chrysler300] Danger of wheel failure unless the rims are replaced b
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Danger of wheel failure unless the rims are replaced by str...



Hi Gil,

Regarding your awaiting a real tire expert¹s statement that the pressure on
the bead area of bias ply wheels is greater when they have radial tires
mounted on them, what about ³Old Tire Man¹s² quote:

Nickname: Old tire man
Review: You're neglecting a very important design fact when comparing radial
and bias tires and rims: How the load is transferred through the tire to the
rim. Radials transfer the load (vehicle + payload) to the bead of the rim
and bias transfers the load upwards through the center of the rim, ie, bias
rims are thinner at the bead area than radial rims. I was there when we made
the transition to radials in the 1970s and I can't tell you how many bias
rims I personally have seen 'peeled' at the bead when a radial tire was
(wrongly) mounted. I won't mount a radial on a bias designed rim, but then I
have many years of personal (in a professional setting) experience to rely
on. Safety first.
Date reviewed: Nov 24, 2006 10:24 PM

This was in reply to an article:

Classiccar.com

A Tale of Two Tires
A case for radial tires on your classic car

http://www.businessweek.com/@@WsomwGQQ4NgSUwAA/autos/content/may2006/bw20060
504_512529.htm?chan=autos_classic+cars+index+page_insight

Regarding the ³K² wheel covers coming off, there are 2 recesses in the ³K²
wheel covers that engage the 2 bumps in period Mopar wheels. They are on
either side of the valve stem.

Regards,
Tony



For those that insist on frequent cornering to the limit (not that there is
anything wrong with that!) I would agree stronger rims would probably be a
good idea.  As to the assertion about the radial side wall flexing
("twisting") being worse for the rim bead area than bias---I'll await a real
tire expert's statement before I buy that.

However, I think that was a function of the "K" wheelcover's one piece
construction more than the wheel.
So there you are---my opinion on the subject and I'm stuck with it!

300ly, Gil Cunningham
Chilly Tallahassee, FL
 




[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.