Re: [Chrysler300] Danger of wheel failure unless the rims are replaced by str...

[Tony Rinaldi <awrdoc@xxxxxxxxx>]

No. They could not reproduce the vent holes. Stockton already has in its
catalog, 15² replacements but without vent holes. Wheel Vintique will take
you original wheel faces and weld on new. Not sure if the flexing of the
original faces would still be a problem.

Tony




From: <Moparpjf@xxxxxxx>
Date: Sat, 27 Jan 2007 17:59:53 EST
To: <Cotejohnr@xxxxxxx>, <awrdoc@xxxxxxxxx>, <Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] Danger of wheel failure unless the rims are
replaced by str...

In a message dated 01/27/2007 9:50:50 A.M. Eastern Standard Time,
cotejohnr@xxxxxxx writes:
> Can't  recall,  did  you have 15 inchers
> made as well for  '55-'56?
and '61s as well.
 
PJF




[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/