Re: [Chrysler300] Danger of wheel failure unless the rims are replaced by str...

[dan300f@xxxxxxx]

Hi all:

Years ago, I had a problem with wheel covers spinning on my 300F and 1966 300 
Conv.  I solved the problem by applying a few extra coats of paint on the 
surface where the wheel covers bite.  The teeth bite into the thickened paint and 
there is no more spinning or noise.  I would presume that this would also 
help the wheel covers from flying off.

Dan Reitz
Northridge, CA


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/