RE: [Chrysler300] L torsion bars

["Ryan Hill" <ryan_hillc300@xxxxxxxxxxx>]

I'm curious why you had to take the torsion bars out to pull the 
transmission? Not sure why the bolts would be backed off that much, was the 
ride height normal or really, really low? Normally you would add tension as 
the spring tension of the bar weakens......leaving the tension bolt deaper 
into the threads....? Am I wrong......it has been a while since I've been 
under the car?



Ryan Hill ('65 300)

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping 
http://shopping.sympatico.msn.ca/content/shp/?ctId=2,ptnrid=176,ptnrdata=081805



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/