Hi Michael and club members I don´t understand how this unit working I have tryed on my car and the unit can only retract it newer extend when I put a vacuum pump on the unit it only retrac when I add vacuum to it. So the plunger will never touch the carb butterflies. is my unit wrong adjusted. Maybe somone can give me information about this. Tomas Turovaara Sweden ----- Original Message ----- From: Michael Reed To: Tomas Turovaara Sent: Tuesday, August 08, 2006 8:58 PM Subject: Re: [Chrysler300] 1961 300 G 1.. can some one describe how it should work the anti stall unit ? when the accelerator is released, the plunger on the antistall unit extends, preventing the carb butterflies from suddenly closing, which in turn often would stall the engine. In other words it allows the butterflies to close the last little bit slowly. 2.. I have adjust it to .005-.010 inch when the idle speed is 750 rpm and transmission on D position but the anti stall unit is not activated in this situation should the unit be activated when the idle speed is 750.When I stop the engine it is the same gap .005-.010 is this ok. Is the vacuum to low? No, I don't believe it should be activated. You can tell if it is working by observing it with the transmission in neutral, parking brake set, and revving the engine. You should see the plunger extend and retract as the manifold vacuum changes. 3.. Can I adjust the timing with a vacuum meter has any one tried this way ? I've never heard of it, and I don't see how the timing could be set anywhere near correctly with a vacuum meter. A timing light is best -- although some can set it by "ear" -- listening to the engine as they adjust it. Mike Reed in beautiful (toady, anyway) Lake Odessa, Michigan [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/