Re: [Chrysler300] 413 rebuild
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 413 rebuild



Hi All
I have a pair of exhaust manifolds PN 2843992-1 {Left} and PN 2806900{Right} 
They are 2 3/8" openings. www.hobbydigest.com list them as for 1967-1969 
383-440HP. They also show casting #'s for the J and K plus a number for the 
B/RB truck.
Ray 300L
San Jose Ca.
----- Original Message ----- 
From: "Jack Farris" <j2farris@xxxxxxxxxxx>
To: "Carlton Schroeder" <schroe99@xxxxxxxxxxxx>
Cc: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, February 15, 2006 10:20 AM
Subject: Re: [Chrysler300] 413 rebuild


>I replaced the factory "log style" manifolds on my 66/300 with ones I
> got from a '69 B-body with a 440HP. They are much swoopier and
> actually allow better spark plug access. The casting numbers, which I
> just went out to the garage and read, appear to be 2843992 on the
> left, and 2808800 on the right--although the 88 may be a 69 (tight
> space made reading difficult). I don't remember what the outlet
> diameters were, but I still do have a spare set of gaskets, and they
> measure 2-3/8". I also have, laying in my garage, a manifold with a
> casting stamp 2853409, which looks very much like the one on the car.
> I measured it's outlet at 2-3/8".
>
> Jack
> ------------------------------------------------------------------------ 
> -------
>
>
>
> On Feb 15, 2006, at 6:12 AM, Carlton Schroeder wrote:
>
>>
>> 3) Are there any big block exhaust manifolds, other than something
>> like the Max Wedge manifolds, that would have a 2 1/4 or better yet
>> a 2 1/2" outlet.  I thought there would be numerous 440 manifolds
>> like that but I haven't found any.  I have seen some manifolds that
>> appear to have less restrictive flow lines, but they were also 2"
>> outlet.  I am a little surprised but I guess the 300H had 2" dia.
>> manifold outlets, like all the other models - is that right?  How
>> about that higher horsepower H - did it have larger manifolds?
>>
>> Thanks for your help.
>>
>> Carlton.
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
> 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.