Re: [Chrysler300] Availability of Replacement 14" 300 Wheels

[Tony Rinaldi <awrdoc@xxxxxxxxx>]

Hi Jeff,

Good idea!

See separate post re availability of 15" "G" wheels.

Tony


> From: Jeff Gretz <gretz@xxxxxxxxxx>
> Date: Thu, 18 Aug 2005 14:38:08 -0400
> To: Tony Rinaldi <awrdoc@xxxxxxxxx>, <macthehammer@xxxxxxxxxxxxx>, Chrysler
> 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
> Subject: RE: [Chrysler300] Availability of Replacement 14" 300 Wheels
> 
> Is anyone else interested in having 15" 'G' wheels made? I'd buy 4 if they are
> available..
> 
> Jeff Gretz
> 
> -----Original Message-----
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
> Behalf Of Tony Rinaldi
> Sent: Thursday, August 18, 2005 11:27 AM
> To: macthehammer@xxxxxxxxxxxxx; Chrysler 300 Club
> Subject: Re: [Chrysler300] Availability of Replacement 14" 300 Wheels
> 
> Hi to all,
> 
> Frank Mauro has agreed to make up a wheel after he receives mine.
> 
> Mac The Hammer AKA Jim McMullan as agreed to bring by an original "F" hubcap
> to Stockton when the wheel is ready.
> 
> Frank Mauro also wants to bring in a car to actually put the wheel on to OK
> clearances.
> 
> I am hoping that Mac would volunteer to do this.
> 
> NOW!!! To answer all the other questions regarding will they fit "C"s, "D"s
> etc. Now is the time for the list's expertise to shine.
> 
> Who can tell us if the original 300 OEM wheels are the same or different.
> 
> How about parts books. Interchangeable parts books?
> 
> Frank can't answer those questions.
> 
> If no one knows then someone has to send an original "C" etc to Stockton
> Wheel.
> 
> See my separate post for "G" 15 inch questions.
> 
> Tony
> 300-F Conv't
> 
> 
>> From: James McMullan <macthehammer@xxxxxxxxxxxxx>
>> Reply-To: <macthehammer@xxxxxxxxxxxxx>
>> Date: Thu, 18 Aug 2005 11:12:39 -0700
>> To: Tony Rinaldi <awrdoc@xxxxxxxxx>
>> Subject: Re: [Chrysler300] Availability of Replacement 14" 300 Wheels
>> 
>> Tony I go through Stocton on my way to my ranch (ware my car is ) Could
>> stop on the way back with a F cap.Let me know ! Best Date when the wheel
>> will be ready.I will NOT leave the cap with them.Jim
>> 
>> 
>>> [Original Message]
>>> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
>>> To: <macthehammer@xxxxxxxxxxxxx>
>>> Date: 8/18/2005 10:45:37 AM
>>> Subject: Re: [Chrysler300] Availability of Replacement 14" 300 Wheels
>>> 
>>> Jim,
>>> 
>>> You could do us all a service by going to Stockton and checking out
>>> everything. I just sent them a wheel and a regular 1960 Chrysler hubcap.
>> Do
>>> you have a 300 hubcap (hopefully a 300-F hubcap) that you could bring over
>>> and see if it fits his wheel face?
>>> 
>>> It is a shame that we can't buy full size speed rated tires in our size
>>> 235/75R14.
>>> 
>>> Tony
>>> 
>>> 
>>>> From: James McMullan <macthehammer@xxxxxxxxxxxxx>
>>>> Reply-To: <macthehammer@xxxxxxxxxxxxx>
>>>> Date: Thu, 18 Aug 2005 08:47:08 -0700
>>>> To: Tony Rinaldi <awrdoc@xxxxxxxxx>
>>>> Subject: RE: FW: [Chrysler300] Availability of Replacement 14" 300
>> Wheels
>>>> 
>>>> Tony Count me in four 4.Can pick up in Stocton ,So I dont have to deal
>> with
>>>> shipping.Jim McMullan 300 F
>>>> 
>>>>> [Original Message]
>>>>> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
>>>>> To: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
>>>>> Date: 8/18/2005 7:44:13 AM
>>>>> Subject: FW: [Chrysler300] Availability of Replacement 14" 300 Wheels
>>>>> 
>>>>> Hi to all,
>>>>> 
>>>>> We have exceeded our minimum of 12 wheels with interest in 15 sets of 4
>>>> or 5
>>>>> wheels.
>>>>> 
>>>>> One member has recently had a failure of his original 300 wheel. See
>> his
>>>>> message below:
>>>>> 
>>>>> ³count me in for 5.  Since the 14 by 6.5 oem wheel on my F split along
>> the
>>>>> back seam, I have been worried about a duplicate happening.²
>>>>> 
>>>>> Keep sending me your ³I am interested² e-mails so that you can get in
>> on
>>>>> this exclusive run @ a special price of $85 including high gloss powder
>>>>> coating for 14x7 racing wheels with 5 bolt 4 1/2² centered pattern.
>>>>> These wheels will not accept ³baby moons² since the center of the
>> wheel is
>>>>> stronger and it does not have the depressions that form the nubs that
>>>> small
>>>>> hubcaps grab on to. They will accept full hubcaps and have proper valve
>>>> stem
>>>>> placement consistent with out OEM wheels.
>>>>> 
>>>>> I am shipping Stockton one original wheel with a regular 1960 Chrysler
>>>>> hubcap today for them to verify.
>>>>> 
>>>>> Tony
>>>>> 300-F Conv¹t
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> [Non-text portions of this message have been removed]
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> To send a message to this group, send an email to:
>>>>> Chrysler300@xxxxxxxxxxxxxxx
>>>>> 
>>>>> For list server instructions, go to
>>>> http://www.chrysler300club.com/yahoolist/inst.htm
>>>>> Yahoo! Groups Links
>>>>> 
>>>>> 
>>>>> 
>>>>>  
>>>>> 
>>>>> 
>>>> 
>>>> 
>>> 
>>> 
>> 
>> 
> 
> 
> 
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/