Re: [Chrysler300] rear end housing swap

[William Huff <whuff@xxxx>]

Hi John and Group,

You may find this site to be useful, they cover a lot of info on the 8 3/4" 
Mopar rear ends.

Bill Huff

http://www.autohobbydigest.com/8_75.html



At 4/28/03 -0400 11:37 PM, you wrote:
>Thank you all who responded to the bearing question re: rear ends. Very
>informative replies. I can't find the time to answer each one individually.
>So - thank you all !
>
>Another question, please, to this group: could somebody tell me specifically
>what rear end assembly, complete, from a later Mopar without the tapered
>axles will fit under, say, a 60 thru 64 Chrysler 300? The few that I have
>measured have had different spacings between the rear spring perches. I do
>know that this swap is do-able, I have seen it done, and, indeed, my 300G
>convert. has such a rear end under it now, but I didn't do it !
>
>No, I am not thinking of doing this modification to a Letter car. But I
>would like to do it to my '62 NYker wagon, and would like to locate and buy,
>in a junkyard, a complete suitable rear end asembly. Just not sure what
>matches up...
>
>Sincerely
>John
>
>
>Yahoo! Groups 
>Sponsor<http://rd.yahoo.com/M=232617.3212172.4524785.2595810/D=egroupweb/S= 
>1706713852:HM/A=1555962/R=0/*http://shop.store.yahoo.com/cgi-bin/clink?1800 
>flowers2+shopping:dmad/M=232617.3212172.4524785.2595810/D=egroupweb/S=17067 
>13852:HM/A=1555962/R=1/1051587677+http>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to 
><http://www.chrysler300club.com/yahoolist/inst.htm>http://www.chrysler300cl 
>ub.com/yahoolist/inst.htm
>
>To unsubscribe from this group, send an email to:
>Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
>Your use of Yahoo! Groups is subject to the 
><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


[Non-text portions of this message have been removed]