Re: [Chrysler300] Tortion bar seals- where to get?

["Don Verity" <d.verity@xxxx>]

Having just worked on one, the 57's have no provision for a seal. The anchor
rests right on the crossmember, so there is no room. One side of the car I
had did have a foam seal one the bar. The other side was so rusty it had to
be pressed out of the anchor. The seals always go on the rear. Make sure the
bars are greased before installing in the lower arms and anchors. This
controls noise and rust.
300ly,
Don
----- Original Message -----
From: Chris Davis <pngkid@xxxx>
Cc: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, July 19, 2004 6:29 AM
Subject: [Chrysler300] Tortion bar seals- where to get?


> How about it folks. Anyone know where I can get torsion bar 'balloon'
> seals. And do they go on front or rear on a '57?
>
> Thought I'd call you before NAPA
>
> thanks,
>
> chris davis
>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>