Re: [Chrysler300] the next windshield wiper question

[Mike Apfelbeck <moparmike@xxxx>]

Electric wipers typically have a "park" circuit that is energized when you 
turn the switch off. I would check the connections first, then check out 
the switch. If the problem isn't there , it must be in the wiper motor, 
there are electrical contacts operated by some kind of cam arrangement for 
the park circuit, they may just need to be cleaned.

Mike

At 12:22 PM 7/4/02 -0700, David Zakarian wrote:
> Are they suppose to come back to the off position on the windshield 
> regardless of when you turn them off? Mine stop at the point on the 
> windshield when you turn off the switch. Any comments out there?
>
> Zak
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/