I would like to attempt to install the windshield on my c-300. I bought the car without the 'shield so I don't have removal experience that I could reverse. I down loaded a manual Chrysler printed in '54 but it contradicts the '55 manual by instructing the installer to place the windshield in the lower corner and spooning out till completely in. My '55 repair manual says to shove the glass UP into the rubber & work it from there. So I figure I'll need 3 or 4 guys to hold the weight of the glass as I work the sticks. I have a not so good windshield that I'm going to put in so if I break it, I break it. My good one took me 4 years to find and I just don't have the confidants yet to install. If I get the other one in, I'll be able to drive the car to someone who can do it. This is what I got so far; padded dash installed - inside garnish molding installed losley but "A" pillar molding installed tight - Gary Goers upper rubber glued in place - I'm going to substitute Gary's lower rubber for a much more flexible new one -two plastic sticks - go jo hand cleaner- nylon rope - I know there are club member who have the expertise to walk me thru this. 300 thanks, John Peabody ------------------------ Yahoo! Groups Sponsor --------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/