------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA/Ey.GAA/8LmulB/TM
---------------------------------------------------------------------~->
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
------------------------------------------------------------------------
There are 6 messages in this issue.
Topics in this digest:
1. 300 Arm Rest Question
From: kraus300@xxxxxxx
2. parts
From: HEADWAVE@xxxxxxx
3. brake hardware
From: Raphael Brunet <Raphael.brunet@xxxxxxxxxxxxxx>
4. Re: 300 Arm Rest Question
From: moparted <moparted_70@xxxxxxxxx>
5. Re: Mice
From: "MGalassi" <C300lover@xxxxxxxxxxx>
6. 300-D diecast model
From: paulholm <paulholm@xxxxxxxxxxxxx>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Tue, 14 May 2002 19:05:13 EDT
From: kraus300@xxxxxxx
Subject: 300 Arm Rest Question
Hello All,
Both my '66 300 and Hurst driver's door armrests are split. Any leads on
reproduction armrests?
As an aside, here's a link to article about club member Ken Mack that
appeared in last Sunday's Detroit News.
<A
HREF="http://detnews.com/2002/metro/0205/12/a02-487473.htm";>http://detnews
.com/2002/metro/0205/12/a02-487473.htm</A>
Jim Krausmann
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Tue, 14 May 2002 23:43:27 EDT
From: HEADWAVE@xxxxxxx
Subject: parts
Greetings, listserver choir. i would like to know what luck you have had
finding two parts, both for my E.
heater control tubes and connector, #1886 356. have replaced heater
control
switch (which was acting like a leaky inner tube), and, although i clearly
have the right part (#'s and eyeballing and careful measurements all
agree),
the old connector will not stay connected. anyone else have this
experience?
any suggested fixes? and, has anyone found this part?
need a manifold to head gasket set, tiny leak on one bank, looks like
someone
a long time ago installed that gasket backward, then cranked it down hard.
sounded fine til last week. are these still available?
let me know -- and thanks. good to have the E out and about again,
regularly.
David Rust
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Wed, 15 May 2002 13:34:08 +0200
From: Raphael Brunet <Raphael.brunet@xxxxxxxxxxxxxx>
Subject: brake hardware
Hello
I'm in the process of rebuilding the brakes on my 300B and I discovered
that the brake shoes retainers are not original.
I'm talking about the small spring plate and clip that hold the shoe on
its support. Do you know a source for these?
Raphael ,Paris France
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Wed, 15 May 2002 07:27:51 -0700 (PDT)
From: moparted <moparted_70@xxxxxxxxx>
Subject: Re: 300 Arm Rest Question
repos are available but in black only.
--- kraus300@xxxxxxx wrote:
> Hello All,
>
> Both my '66 300 and Hurst driver's door armrests are
> split. Any leads on
> reproduction armrests?
>
> As an aside, here's a link to article about club
> member Ken Mack that
> appeared in last Sunday's Detroit News.
> <A
>
HREF="http://detnews.com/2002/metro/0205/12/a02-487473.htm";>http://detnews
.com/2002/metro/0205/12/a02-487473.htm</A>
>
> Jim Krausmann
>
>
>
> [Non-text portions of this message have been
> removed]
>
>
=====
__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Wed, 15 May 2002 09:15:12 -0700
From: "MGalassi" <C300lover@xxxxxxxxxxx>
Subject: Re: Mice
After paying my exterminator several hundred dollars, I learned that the
best material is old fashioned steel wool. Rats and mice will not even
attempt to attack this material.
----- Original Message -----
From: "Les Fairbanks" <lessue@xxxxxxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, May 10, 2002 9:05 AM
Subject: [Chrysler300] Mice
> Tom : We have used moth balls with some success but we put them under
the
car rather than in it so we didn't have to live with the odor inside the
car. I read somewhere that Bounce dryer sheets will work to. I tried that
this past winter & I didn't see any mice & the car has a nice smell but I
am
not sure how well that works as I only tried the one time. Les Fairbanks
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Wed, 15 May 2002 13:15:36 -0500
From: paulholm <paulholm@xxxxxxxxxxxxx>
Subject: 300-D diecast model
Attention all, JUST got in the mail a flier from the Danbury MInt
for their 1:24 scale red 300-D hardtop.
I am not going to use the reply card, anyone want the card??
--
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of the Forward Look Network
Archive Sitemap