Re: {Chrysler 300} Window gaskets

Mike, face car so seals are in sun for a few hours, way better when warm.

Gary

Sent: Wednesday, September 24, 2025 9:44 AM

Cc: Ryan Hill ; Ron Waters ; Club International Chrysler

Subject: Re: {Chrysler 300} Window gaskets

Thank you all for the replies. I’ll see if my glass guy knows how to remove the windows without cutting the gaskets. I’d hate to damage the glass.

Mike

On Wed, Sep 24, 2025 at 02:50 Robert Hayen <rbrthayen@xxxxxxxxx> wrote:

I have used the rubber extrusion in bulk from Gary Goers many times. to many to count .
you must cut to length . make the splice in the bottom corners of the glass . then super glue them together .

then use wd 40 to install . Gary and I put in many this way .

Quiery got all the extrusions . I just put one in a 60 convertable the other day . If your slow it will take an hour!!!!!!!!

or you can try to make the old one soft again if you have lots of time on your hands.

Robert Hayen here in kalispell montana

On Tue, Sep 23, 2025 at 10:50 AM Ryan Hill <ryan_hillc300@xxxxxxxxxxx> wrote:

Do not cut or damage the original gaskets when removing the glass. Soak them in lanolin until they are soft and pliable again. A common source for lanolin is mechanics hand cleaners like Gojo.(ensure it has lanolin) I like the large tubs they sell as refills for wall mounted pump machines in mechanical shops; the product without pumice.

I start by brushing it on heavily and keeping it in a plastic bag or bin. Keep treating it until it becomes soft and supple again. For me, the worst dried out and hard seals (from a California car) took several months of sitting and soaking to restore but they came back and cleaned up like near new. I did those ones 23 years ago and they’re still nice to this day.

If you’ve already damaged your originals, I’d start looking for a parts car to get them from. And those of you who have parts cars and are removing glass, keep in mind there is/will be value in the gaskets not just the glass.

Ryan Hill

On Sep 23, 2025, at 6:43 AM, 'Ron Waters' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

For 57 and later Mopars, all the repro windshield and back glass gaskets are poor quality. For your 300G, you will have to reuse your gaskets.

Ron

From: mguarneri via Chrysler 300 Club International
Sent: Tuesday, September 23, 2025 9:06 AM
To: spencemazc@xxxxxxxxxxx; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} Window gaskets

You can try andy bernbaum at oldmoparts....John

https://www.oldmoparts.com/weatherstripping/windshield-rubber-a-319c

In a message dated 9/22/2025 8:45:05 PM Eastern Daylight Time, chrysler-300-club-international@xxxxxxxxxxxxxxxx writes:

Painting my G does anyone know if windshield and rear window gaskets are available?

Sent from my iPad

--

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---

You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.

To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/00864E85-EE1F-4C00-96FC-1CD8F4DFEDE8%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/738482806.6664999.1758632764456%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/000401dc2c90%2409ee7ed0%241dcb7c70%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/6C3E893E-E23E-4903-A98A-1F6FB3803D27%40hotmail.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAEk42odKXezur-D1tNQYhMcevNPN8GJngn1qHZ4GWh-z8SbiyQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPaVs-d62i2iAGjON2_jP1sGmj7oNusxytif-6tcH7M%3D%2BX%2BfDA%40mail.gmail.com.