Re: {Chrysler 300} Intake manifold bolts

["'Donald Verity' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

None. They go into the lifter valley. Only oil can leak there.

Don

I have a possible coolant leak I am needing to address.

Can someone share exactly which intake manifold bolts go through to coolant passages on our 413's?

I searched for a flow diagram online and found notta; nothing in the manual or archives..

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/499730547.48278.1743359380266%40connect.xfinity.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/472609717.1963806.1743371820932%40mail.yahoo.com.