Re: {Chrysler 300} Intake manifold bolts

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi Allan,

I have personally never seen an intake manifold bolt with evidence of coolant jacket penetration. 

Others who know more can confirm/deny.  

Sent from my iPhone

On Mar 30, 2025, at 14:29, 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



I have a possible coolant leak I am needing to address.

Can someone share exactly which intake manifold bolts go through to coolant passages on our 413's?

I searched for a flow diagram online and found notta; nothing in the manual or archives..

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/499730547.48278.1743359380266%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/D447EFAA-ED26-4266-8B52-B0941CA1FB37%40yahoo.com.