Re: {Chrysler 300} 57 - 9 Convertible Top Motor Hydraulic Hoses

[Scott T <scotttaylorsc@xxxxxxxxx>]

I second the recommendation for HydroElectric in Florida.  They have all the pumps and lines needed for a good convertible top operation.

Scott

On Saturday, March 22, 2025, 'Ron Waters' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hey Everyone –

 

I'm looking to source the hydraulic hoses that connect the 57-9 convertible top motor reservoir to the pistons. Yes, I'm aware that these can be made up by a shop. But I want to see what's out there first. Also, I believe there should be a grommet between the base of the each piston and the anchor that’s bolted to the floor.  Need a source for that as well. Thanks !

 

Ron

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/000701db9b64%2485771390%2490653ab0%24%40comcast.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANDych2badjwAp%3DHU0fwyTu5TAkrZfvifjVBNnChkaCqXao%2BVQ%40mail.gmail.com.