I’m using original pistons and motor. I’m concerned that the pitch on the threads may be different (metric, fine thread, whatever), so that I’d end up having to buy their motor and pistons for compatibility. Something I’d rather not do. Ron From: John Grady hydro E lectric (? Sp) florida the ends are screwy ( hah) tried to make myself you end up with row of adapters just buy his not bad
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001001db9b69%24aae53120%2400af9360%24%40comcast.net. |
Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of
their respective authors.
This site contains affiliate links for which we may be
compensated.