Re[2]: {Chrysler 300} Rear of gauge cluster 1963

Yes, that would be the purpose, only if a radio was ordered. It isn't shown in the FSM, presumably, because the photo they took must have been a cluster that was not used for a radio-equipped car. I haven't had the 63 cluster out in the last 12 years or so; couldn't remember.

------ Original Message ------

From "'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

To "Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>

Cc "John Grady" <jkg@xxxxxxxxxxxxxxxxx>; "Richard McFarland" <firemc1958@xxxxxxxxx>; "Club International Chrysler" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Date 2/18/2025 8:21:30 PM

Subject Re: {Chrysler 300} Rear of gauge cluster 1963

Believe there is a condenser on the back of the housing for noise suppression…

Sent from my iPhone

On Feb 18, 2025, at 21:06, Mark Lindahl <mplindahl@xxxxxxxxxxxxx> wrote:

Here is a picture

--

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---

You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.

To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/47C4C9AB-3418-41CE-BC30-FAAEAC44E87B%40sbcglobal.net.

--

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---

You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.

To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/ECDB77DC-A920-4599-8050-09B3000C39A4%40yahoo.com.