Re: {Chrysler 300} Transmission Pan Gasket for 300F

["'Donald Verity' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I never use any sealer on the pan gasket. It's more important that the pan surface is flat. The gaskets I use are a black material that is stronger than cork. I also rough up the pan surface with a 2 inch roloc on my grinder. It give some bite on the gasket. I torque to 8 and then 13 lb ft. No leaks.

Don

Good Afternoon Everyone:

I need to replace the transmission pan gasket on my 60 300F.  I have the gasket from A1 Auto. 

Do I just use the dry gasket, or should I put any sort of gasket sealer on it?

Thanks.

Al Stauder

--

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---

You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.

To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CC161CB4-C2EC-4949-8962-3C55BC7A6FD9%40gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1834723111.6761364.1739485750527%40mail.yahoo.com.