Re: {Chrysler 300} F exhaust

No welding needed if you have good clamps and hangers. Since the Waldron's tailpipes wouldn't fit my 300F, I'm still running the original ones connected to their mufflers.

On Tue, Jan 28, 2025 at 11:29 AM 'Ron Waters' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

J-Y –

Under normal circumstances, is there ever a need to weld an exhaust system together ? I have vintage NORS pipes for my convertible, including the pre-mufflers (resonators?) and I want to assemble before dropping the engine in place. But I’ve held off until I have an answer to this very question.

Ron

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001f01db71ba%24f1751700%24d45f4500%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPWtQ%2BZ81j%2BDuX%3DuGMr%2BUfGbv8Vmeh%2Bvkm_5kbZViR3pQ%40mail.gmail.com.