RE: {Chrysler 300} 300K (1964) Rear Antenna

Thanks, Since I am going to drill the hole…I wonder if there is room to move toward the trunk so that the hole is flat…

James

From: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Sent: Tuesday, January 21, 2025 11:41
To: James Douglas <jdd@xxxxxxxxxx>
Cc: Ronald Klinczar <rjklinczar@xxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300K (1964) Rear Antenna

Here is the antenna hardware.

On Tue, Jan 21, 2025 at 10:44 AM James Douglas <jdd@xxxxxxxxxx> wrote:

Thanks Ron, I have nothing…

I may have to take a block of brass and make a part and sent it out for chrome. Yuck!

James

From: Ronald Klinczar <rjklinczar@xxxxxxxxx>
Sent: Tuesday, January 21, 2025 10:42
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: James Douglas <jdd@xxxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300K (1964) Rear Antenna

James, I have a 1965 300 which is similar in that the antenna rides a slope. I needed to replace my antenna with an aftermarket, albeit a front, but I needed to use the original trim bezel to match the body slope. I say this because I do not know if you have an original trim bezel or not, but that is an important consideration.

Ron Klinczar

65 300 in Ice Blue

On Tue, Jan 21, 2025, 12:41 PM Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

James,

The hole is one inch but it goes up the slope of the fin. See the attached pictures.

I was lucky to get the original antenna back from the seller of my car.

Nick.

On Tue, Jan 21, 2025 at 9:25 AM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Can anyone tell me two things about the rear mount antenna?

What was the factory hole size.
How far down from the end of the chrome mini-fin is the center of the hole?

I assume that it is equal distance from the fin to the trunk edge.

The aftermarket electric antenna’s want a one inch hole. That would be tight in that spot.

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171FB07C56F76EDC3878B3C93E62%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPftw06GSg53jCmnzKzC4_0dEyHMnwhsQwuxL2EQ3gM%3DQ%40mail.gmail.com.