|
Hi Allan, The drivers side power feed is just like mine. The harness I got from Murray for the passenger side is a shared harness with the driver’s side. It has a “Y” at the point where the
old one was screwed down toward the rear of the driver’s seat. The problem is that it is not long enough to screw down toward the rear of the passenger seat and then again at the front with the ground wire. That is why I am looking for a photo of the wire in a car that has both electric seats to see how it routes. James From: ALLAN
POZDOL <apozdol@xxxxxxxxxxx> I don't know if you had a power driver's seat already, but here is a shot of the factory wiring on my car. I
ran the passengers cable over the tunnel as the other pics had shown. I this what you were looking for?
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61711037FD5D5313E954FDA093E72%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap